If you have a deck that looks dated, there are several steps you can take to make it look fresh again. One of the most important things to do is to seal your deck against the sun’s UV rays. You also want to avoid using high-powered pressure washers on it.
Table of Contents
Preventing water damage
Suppose you’re building a new deck, one of the most important steps in protecting it from water damage. Water can cause severe damage to decks, including wood rot and mold growth. Fortunately, you can take some simple measures to avoid this problem.
One way to prevent water damage is to seal the deck. Sealing a deck prevents moisture from entering the wood, which prevents mildew from growing. You can apply a coat of water-resistant deck sealant every 1-2 years.
Another way to avoid water damage is to protect the deck from excessive sunlight. UV-protecting finishes help disrupt the chemical reactions when the wood is exposed to sunlight. These finishes can be used on exterior woods or interior woods.
For a longer-lasting, more durable finish, apply a stain-sealant combo. Depending on your preference, you can choose from a wide variety of options, with alkyd-based, oil, or water-based binders. They can be applied to various materials, such as wood, concrete, and stone.
To protect the deck from rain, use gutter guards. Installing drains can also help direct runoff away from the house.
A dry well can also be constructed. Filling a hole with stones is a good option. It will slowly disperse water into the ground. Alternatively, you can install bricks or cement. However, you should slope the bricks away from the house.
Leaking windows and doors are another major source of water leaks. It is a serious problem, as water can easily run down walls, under the house, and into your home’s foundation. The water will likely freeze, which will further damage your deck.
If you’re building a new deck, plan for winter. Snow can create puddles on your deck, damaging the wood. Also, keep in mind that planters can also cause damage to your deck.
While various products can help you protect your deck from water, the most important thing is to plan for the possibility of rain. If you don’t, water can leave unsightly stains and damage your deck.
Sealing against UV rays
If you own a wood deck, you may be concerned about UV rays causing damage to your deck. These rays can cause wood to fade and crack. In addition, they can cause rot and fungal growth.
The best way to protect your deck is to apply a sealant. A sealer creates a protective layer on your deck that protects it from moisture, water, mildew, and insects. Sealants can help extend the life of your deck by reducing wear and tear.
It would help if you considered sealing your deck every two years. It will prevent damage caused by the sun’s rays and rain. It can also prevent mold and mildew from growing on your deck.
The type of sealant you use can vary based on the material your deck is made from. For example, Ipe decking can be pre-finished with a sealer that has a built-in UV inhibitor. Other materials, such as pressure-treated wood, can be more resistant to UV rays.
Inspecting your deck throughout the year
To get the most out of your deck, it’s important to perform regular inspections. For starters, you should check your railings for strength and functionality. A deck that needs to be properly maintained can become a safety hazard. You should also be aware of any loose screws and bolts. These can lead to tripping hazards.
Another safety hazard is wood rot. Decks with rot are not safe for use. They can cause the wood to swell and split. Rotted wood is unsightly, but it can also be dangerous. Getting rid of the problem will extend the life of your deck.
Decks should be inspected during the fall and spring seasons. Getting distracted is easy, but a thorough inspection can help you avoid serious accidents. The best way to do this is to hire a professional. An experienced inspector can point out issues that you may have overlooked.
Besides looking at your deck for potential hazards, you should take time to inspect the area around it. The footings, ledger board, and decking are all components that need to be checked regularly. Some of these areas are more likely to develop problems than others.
Avoiding high-powered pressure washers
High-powered pressure washers may seem like a great way to maintain your deck, but you should know how to use them safely. Pressure washing can strip paint and damage wood, so you must learn the right techniques.
You can clean your deck’s dirt, dust, and grime with a deck washer. Make sure to follow the manufacturer’s directions. Also, remember to use protective goggles.
Before cleaning your deck, be sure to sand any splinters. After you’ve finished, make sure your deck is dry. It can take up to two days for a deck to dry fully. Keeping your deck dry will help reduce the amount of maintenance you need to do in the future.
Use a low-pressure washer if you are cleaning a soft surface. It will ensure that the top coating is not stripped. You’ll also need a wide nozzle to cover the entire surface. Check https://titandeck.net/products/ to learn more about amazing products.
When you are cleaning a deck with a power washer, you’ll need to make sure you wear protective clothing. Ensure that your hose is at least 25 feet long. In addition, avoid using electrical lines, conduits, and other hazards.